detectorclocks_icarus_run5252.fcl

Go to the documentation of this file.

# 
# File:    detectorclocks_icarus_run5252.fcl
# Purpose: DetectorClocks configuration appropriate to ICARUS minimum bias runs.
# Author:  Gianluca Petrillo (petrillo@slac.stanford.edu)
# Date:    March 29, 2021
# Version: 1.0
# 
# This DetectorClocksStandard configuration reflects the configuration of ICARUS
# minimum bias data runs like run 5252.
# 
# There is a single PMT waveform per channel,  acquired at beam gate opening
# time. TPC is acquired also based on beam gate.
# The timestamp of PMT are not assigned and their value is stored as 0.
# This configuration aims to align those PMT waveforms with the TPC ones.
# 
# An important parameter is that the PMT waveform is set to 60% post-trigger
# (i.e. 10 out of 25 microseconds are collected before the beam gate opening).
# 
# This is an overriding configuration: include it after the main configuration;
# for example:
#     
#     #include "simulate_sliding_window_trigger_icarus.fcl"
#     #include "detectorclocks_icarus_run5252.fcl"
#     
#     # ... other overrides as needed
#     
# 
# Changes:
# 20210329 (petrillo@slac.stanford.edu) [v1.0]
#   original configuration
# 
# 

# ------------------------------------------------------------------------------
services.DetectorClocksService: {
  @table::services.DetectorClocksService
  
  # timestamps are set to 0 (and it is in electronics time);
  # 25 us PMT window with post trigger 60% means beam 10 us after the start
  #   of the waveform, i.e. 10 us from electronics time start
  DefaultBeamTime: 10
  DefaultTrigTime: 10
  
  G4RefTime: 0
  
  InheritClockConfig: false # after we spend time to override it, just leave it alone!
  
#  TriggerOffsetTPC: -340 # leave as is
  
} # services.DetectorClocksService