ICARUS Operations Wiki

~
~

Are you on shift FROM HOME soon? As part of the response to the COVID-19 situation, ICARUS has adopted a remote shift scheme where shifters can perform duties from their computers. This current method requires the shifters to get extra accounts and access. Here is what you need to do to get ready for your from-home shift:

1. Read the remote connection page for details on how to get the extra accounts and access. Please get the pre-requisite accounts ASAP and check that you can successfully make the connections described in that page. You'll need them to carry out the different shift tasks.
2. Read the For shifters section below, specially the What to do while on shift subsection. The information in those pages is still valid and discusses what shifters should monitor and do during their shift. You do not have to be an expert but you are expected to have revised this information in preparation to your shift.

Collaborators, shifters and experts: You are required to document all activities and issues occurring during shifts and at the SBN Far Detector (FD) by making an entry in the ICARUS ECL.

NOTE: Please keep in mind that things on these pages are subject to change due to the experiment's commissioning status and the evolving COVID-19 situation.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Important and useful pages

• Expert Contact List . List of experts and contact information (Single Sign-On link).
• ICARUS Electronic Collaboration Logbook . Use your Fermilab Services account user and password to access the the ECL. Please click the Request an account bottom if you don't have one already.
• List of Acronyms . Provides the meaning of commonly encountered acronyms in ICARUS.
• Accelerator Acronyms . Provides the meaning of commonly encountered acronyms in Fermilab's accelerator scene.

~
~

• Table of contents
• [ICARUS Operations Wiki]
  • [Important and useful pages]
  • [For shifters]
    • [What to do while on shift]
    • [Shift bulletin board]
    • [Cathode HV Monitoring]
    • [Grafana DAQ Monitoring (for shifters)]
    • [Online Monitoring (for shifters)]
    • [PMT HV Monitoring]
    • [Impedance Monitoring]
    • [Help! I'm on shift and I'm trying to...]
    • [Taking data from the Control Room]
    • [Expert Contact List]
    • [Shift assignment and swaps]
    • [Live Event Display]
  • [For experts]
    • [Expert bulletin board]
    • [ICARUS Slow Controls (DCS)]
    • [PMT DCS Controls (link to DCS wiki)]
  • [SBN DAQ Documentation]
  • [Software Configuration for the ROC]
  • [Remote connections]

~
~

::: Edit this section{.icon-only .icon-edit} :::

For shifters

::: Edit this section{.icon-only .icon-edit} :::

What to do while on shift

Main page for shifters.

Monitoring tools and shift requirements are expected to change frequently, specially during the commissioning period. So make sure to read the instructions in this subsection at least one day before the start of your shift, even if you have previously taken shifts. Shifters are strongly encouraged to familiarise with the screen layouts and tasks as early as possible. Either a current shifter or other collaborator with previous experience will be happy to help you get up to speed.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Shift bulletin board

Page for revising currently running conditions.

Running conditions are expected to change frequently, specially during the commissioning period. Check right before taking over the shift or in the very first minutes.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Cathode HV Monitoring

This page describes Cathode HV Monitoring information.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Grafana DAQ Monitoring (for shifters)

This page describes the current use of Grafana to monitor run status by the shifter.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Online Monitoring (for shifters)

This page describes the necessary information to run the Online Monitoring from the Control Room.

~
~

::: Edit this section{.icon-only .icon-edit} :::

PMT HV Monitoring

Slow controls monitoring for PMT High Voltage information (page in development)

~
~

::: Edit this section{.icon-only .icon-edit} :::

Impedance Monitoring

NEWLY ADDED! Page on impedance monitoring.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Help! I'm on shift and I'm trying to...

This page is the location of various helpful bits about doing things in the control room, and in the cases where better documentation exists, this can link you there. For anything from taking screenshots, to running the DAQ...

~
~

::: Edit this section{.icon-only .icon-edit} :::

Taking data from the Control Room

This page describes running the DAQ as a shifter -- how to start a run, stop a run, etc.

• Taking Data with More Components

~
~

::: Edit this section{.icon-only .icon-edit} :::

Expert Contact List

List of experts and contact information (here is the Single Sign-On link).

Have you tried to solve the issue or you are unsure about how to proceed? Call an expert. Log into the docdb under the ICARUS account.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Shift assignment and swaps

Brief description about signing up for shifts and requesting a shift swap

~
~

::: Edit this section{.icon-only .icon-edit} :::

Live Event Display

About the TITUS Live Event Display

~
~

::: Edit this section{.icon-only .icon-edit} :::

For experts

::: Edit this section{.icon-only .icon-edit} :::

Expert bulletin board

Page with things to be aware of by experts.

~
~

::: Edit this section{.icon-only .icon-edit} :::

ICARUS Slow Controls (DCS)

Describes how to bring up the GUIs running in the ICARUS control room.

~
~

::: Edit this section{.icon-only .icon-edit} :::

PMT DCS Controls (link to DCS wiki)

Wiki page on the sbndcs page for the PMT controls

~
~

::: Edit this section{.icon-only .icon-edit} :::

SBN DAQ Documentation

The following links are in constant update. Please make sure to check the most recent versions for troubleshooting.

Main page https://cdcvs.fnal.gov/redmine/projects/sbndaq/wiki
CRT Readout https://cdcvs.fnal.gov/redmine/projects/sbndaq/wiki/Running_CAEN_DT5702_readout_of_CRT

~
~

::: Edit this section{.icon-only .icon-edit} :::

Software Configuration for the ROC

The software configuration wiki describes the software, configurations, and scripts, used to operate ICARUS shifts from the ROC-West control room. ROC-West is the Remote Operations Control Room on the West side of Wilson Hall, first floor.

~
~

::: Edit this section{.icon-only .icon-edit} :::

Remote connections

This page describes how to set up ICARUS remote connections for shifters and expert activity. :::

Files (0)

::: {style=”display: none;”} ::: ::: {.box} [ [ ]{.attachments_fields} [ (Maximum size: 400 MB) ]{.add_attachment style=””} ]{.attachments_form} ::: ::: :::

Also available in: PDF{.pdf} HTML{.html} TXT{.txt}

::: {style=”clear:both;”} ::: ::: ::: :::

::: Loading... :::

::: :::

::: ::: {.bgl} ::: {.bgr} Powered by Redmine © 2006-2019 Jean-Philippe Lang ::: ::: ::: ::: :::